Specifications

DS300f G2 Series User Manual
110
vIewInG a lISt of IScSI tarGetS
A targetisalogicaldeviceontheASUSDS300fG2subsystem.Thedefaulttargetexposesalllogicaldrivesand
is associated with all portals on the subsystem.
To view a list of iSCSI targets:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Target tab.
Target information includes:
• ID
–IDnumberofthetarget
• Alias–Ifassigned
• AssignedPortals–Portalsassignedunderthistarget
vIewInG IScSI tarGet InformatIon
To view information about a target:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Target tab.
4. Clickthetargetyouwant,thenclicktheView button.
Target information includes:
• ID
–IDnumberofthetarget.
• Name–iSCSIqualiedname(iqn)ofthistarget.
• Alias–Maximumof32characters.Useletters,numbers,space
betweenwords,andunderscore.Analiasisoptional.*
• Status–Upordown.
• ErrorRecoveryLevel–Errorrecoverylevelsupported.
• InitialR2T–Allowsinitiatortobeginsendingdatatoatarget
withoutreceivingareadytotransfercommand.
• MaxOutstandingR2T–MaximumnumberofR2TPDUsthetarget
canhaveoutstandingforasingleiSCSIcommand.
• MaxBurstLength–Maximumlengthofasoliciteddatasequenceinbytes.
• DataDigest–Addsadatadigest(CRC).*
• HeaderDigest–Enablestheuseofheaderdigest(CRC).*
• DataSequenceinOrder–Enablesplacementofdatainsequenceorder
• DataPTUinOrder–EnablesplacementofdatainPDUorder
• DefaultTimetoWait–Afteradroppedconnection,thenumber
ofsecondstowaitbeforeattemptingtoreconnect
• DefaultTimetoRetain–Numberofsecondsaftertimetowait
(above)beforereassigningoutstandingcommands
• Uni-directionalCHAPAuthentication–Uni-directional(peer)
CHAPauthentication,enabledordisabled*
• Bi-directionalCHAPAuthentication–Bi-directional(local)CHAPauthentication,enabledordisabled*
• MaximumConnections–Themaximumnumberofconcurrentconnections
• ImmediateData–EnablestheinitiatortosendunsoliciteddatawiththeiSCSIcommandPDU.
• FirstBurstLength–Inbytes.
• NOP-In-CheckiSCSIconnectionstatus*
Items marked with an asterisk (*) are adjustable under "Making iSCSI Target Settings"