Specifications

DS300f G2 Series User Manual
108
Note
Insomecases,HBAsettingstoN-Portonlyworkifconnectedtotheswitch.Refertoyour
HBA manual for more information.
vIewInG fc Port StatIStIcS
To view Fibre Channel port statistics:
1. Click the Device tab.
2. Click the FC Management icon.
3. Click the Statistics tab.
4. Mouse over the FC port you want to access and click the View button.
ToclearFCportstatistics,see"Clearing Statistics" on page 55.
vIewInG a lISt of fc InItIatorS on the fabrIc
To view a list Fibre Channel initiators on the fabric:
1. Click the Device tab.
2. Click the FC Management icon.
3. Click the Initiators on Fabric tab.
Also see "Viewing a List of Initiators" on page 104.
Port information includes:
makInG fc Port SettInGS
To make Fibre Channel port settings:
1. Click the Device tab.
2. Click the FC Management icon.
3. Click the Port tab.
4. Click the FC port you want to access and click the Settings button.
5. Make these changes as required:
•
Chooseaconguredlinkspeedfromthedrop-downmenu.
ThechoicesareAuto(default),2Gb/s,4Gb/s,and8Gb/s.
• Chooseatopologyfromthedrop-downmenu.
• EnteraHardALPAintheeldprovided.
Enter255todisableHardALPA.
6. Click the Save button.
Port setting inforMAtion
The table below shows the type of attached topology you achieve based on your connection type and the
conguredtopologyyouselect.
Example1:IfyouconnecttheASUSDS300fG2toanFCswitchandchooseNL-Porttopology,youcreatea
Public Loop attached topology.
Example2:IfyouhaveaPoint-to-Pointattachedtopology,youmadeadirectconnection(noFCswitch)and
selected N-port topology.
• FCPortID-FCportnumber
• Location-ControllerIDnumber
• Identier-(hexadecimal)
• State-Linkstatus
• TopologyAttached-
• AliasWWPN-
• WWNN-WorldWideNodeName
• WWPN-WorldwidePortName
• FabricWWNN
• FabricWWPN
• CurrentSpeed
• LinkType-
• HardALPA-