User Guide

12 ASUS DRW-1604P DVD±R/RW drive
Rear panelRear panel
Rear panelRear panel
Rear panel
1.1.
1.1.
1.
Audio outputAudio output
Audio outputAudio output
Audio output
This connector is for an analog audio output cable. This connector is
compatible with “Molex 70553.”
11
11
1
33
33
3
22
22
2
44
44
4
55
55
5
Pin Name Description
1 L Left channel audio output
2 & 3 G Ground
4 R Right channel audio output
2.2.
2.2.
2.
Device configuration jumperDevice configuration jumper
Device configuration jumperDevice configuration jumper
Device configuration jumper
These pins allow you to select either Master, Slave, or Cable Select
mode for the drive. (
Refer to page 14 for the jumper settings )
Pin Name Switch Status Description
1 MA ON Master mode
2 SL ON Slave mode
3 CS ON Cable select mode
4-5 Reserved
3.3.
3.3.
3.
Air ventAir vent
Air ventAir vent
Air vent
This air vent allows air intake to maintain ideal drive temperature.
Make sure the air vent is not blocked by cables or other objects inside
the system.
4.4.
4.4.
4.
Host IDE interfaceHost IDE interface
Host IDE interfaceHost IDE interface
Host IDE interface
This connector is for a 40-pin IDE cable to connect the drive to the
IDE interface on the motherboard.
5.5.
5.5.
5.
DC inputDC input
DC inputDC input
DC input
This DC connector is for a 4-pin power cable from the system power
supply.