User’s Manual

Table Of Contents

Conguring the USB ports using the BIOS

You can enable or disable the front and rear USB 3.2 Gen 1 / USB 3.2 Gen 1 + USB Type-C® (optional)

and USB 2.0 ports from the BIOS Setup.

To disable or enable the front and rear USB 3.2 Gen 1 / USB 3.2 Gen 1 + USB Type-C® (optional)

and USB 2.0 ports:

1. Press <Delete> to enter the BIOS Setup at startup.

2. From the BIOS Setup EZ Mode screen, press <F7> to enter Advanced Mode. From the

Advanced Mode screen, click Advanced > USB Conguration > USB Single Port Control.

3. Select the USB port that you want to enable or disable.

4. Press <Enter> to enable or disable the selected USB port.

5. Click Exit and select Save Changes & Reset to save the changes made.

Refer to Chapter 1 for the location of the USB ports.

38 Chapter 3: Using your computer

ENGLISH