Owner manual

32
ASUS CX200 Internet Camera
ftp://<empty>/<folder>
This allows the Administrator to determine the folder where the Motion
Detected les are stored. Enter a folder name in <folder>. Click Apply
when done.
The folder name must be valid and has appropriate upload
permissions. You must rst enter a valid FTP address in Email /
FTP page. Otherwise the ftp address eld will be left <empty>.
To setup the FTP server, see Section 2.4.4
System Dened / User Dened
The administrator can also determine to either have the system
automatically assign the lenames for the pictures saved. Or manually
assign the lename.
Filename …
Specify a prex lename for the motion detected JPG images. The
default prex is image_
Loop from … to …
This will determine the number of les in the sequence. Once the last le
number is reached, it’ll loop and replace the rst le in the sequence with
the most current image.
Digits …
This will determine the number of digits assignable for the above
sequence. The Administrator can choose to assign between 1 to 6
digits.
Click for an example.
Send Email
Select Yes to send an email when motion is detected.