User Guide

ASUS CUWE-RM User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) Onboard Audio Setting (AUDIOEN)
on audio model only
The onboard 32-bit PCI audio may be enabled or disabled using this jumper. Dis-
able the onboard audio if you are using a PCI audio card on any of the expansion
slots or a primary AMR on the AMR slot (see 3.7.3 Audio Modem Riser (AMR)
Slot). If using a PCI audio expansion card, Onboard AC’97 Audio Controller in
4.4.2 I/O Device Configuration must also be disabled.
Setting AUDIOEN
Enable [1-2] (default)
Disable [2-3]
®
CUWE-RM
CUWE-RM Onboard Audio Setting
Enable
Disable
(Default)
123
123
AUDIOEN
4) Onboard Audio Codec Setting (CODEC)
on audio model only
The onboard audio codec may be enabled or disabled using all of these jumpers.
Disable the onboard audio codec if you are using a PCI audio card on any of the
expansion slots or a primary AMR on the AMR slot (see AMR Slot later in this
section). If using a PCI audio expansion card, Onboard AC’97 Audio Control-
ler in 4.4.2 I/O Device Configuration must also be disabled.
Setting CODEC
Enable [1-2] [1-2] [1-2] [1-2]
Disable [2-3] [2-3] [2-3] [2-3]
®
CUWE-RM
CUWE-RM Audio Codec Setting
DisableEnable
1
2
3
1
2
3
SPK
ADN#
AUD_EN1
AUD_EN2
SPK
ADN#
AUD_EN1
AUD_EN2