Specifications

CUW-AM User’s Manual 15
11) Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output. The con-
nector powers up the system when a wakeup packet or signal is received through
the LAN card.
IMPORTANT: This feature requires that your system has an ATX power supply
with at least 720mA +5V standby power.
CUW-AM Wake-On-LAN Connector
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
PME
Ground
0 1
CUW-AM
12) Serial Port Header (10-1 pin COM2)
The optional serial port bracket can be used to add an additional serial port for
additional serial devices.
0 1
CUW-AM
to COM2 Header
CUW-AM Serial COM2 Bracket
PIN 1
2. HARDWARE SETUP
Connectors
2. H/W SETUP