user manual
13ASUS VW246/VK246 LCD Monitor
3.3  Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the   button to check if the monitor is in 
 the ON mode. 
• Check if the power cord is properly connected to 
 the monitor and the power outlet. 
The power LED lights amber and 
there is no screen image 
• Check if the monitor and the computer are in the 
 ON mode. 
• Make sure the signal cable is properly connected 
 the monitor and the computer. 
• Inspect the signal cable and make sure none of 
 the pins are bent. 
• Connect the computer with another available 
 monitor to check if the computer is 
 properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via 
 OSD.
Screen image is not centered or 
sized properly
• Press the   button for 2–3 seconds to 
 automatically adjust the image (VGA input only). 
• Adjust the H-Position or V-Position settings via 
 OSD (VGA input only).
Screen image bounces or a wave 
pattern is present in the image
• Make sure the signal cable is properly 
 connected to the monitor and the computer. 
• Move away electrical devices that may cause 
 electrical interference.
Screen image has color defects (white 
does not look white)
• Inspect the signal cable and make sure that 
 none of the pins are bent. 
• Perform All Reset via OSD. 
• Adjust the R/G/B color settings or select the 
 Color Temperature via OSD.
Screen image is blurry or fuzzy • Press the   button for 2–3 seconds to 
 automatically adjust the image (VGA input only). 
• Adjust the Phase and Clock settings via OSD 
 (VGA input only).
No sound or sound is low (for models 
with speakers)
• Ensure that the audio cable is properly 
 connected to the monitor and the computer 
• Adjust the volume settings of both your 
 monitor and computer. 
• Ensure that the computer sound card driver 
 is properly installed and activated.
Webcam is not working • Make sure that you have connected the USB cable  
 securely to both the LCD monitor and your 
 computer. 
• Make sure that you use the Microsoft
®
 Windows
®
 Vista / XP Service Pack 2 (3) operating systems.










