user manual

3-18
Chapter 3: BIOS setup
Chapter 3
3.5.4 System Agent Conguration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Conguration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Conguration options: [Auto] [iGFX] [PEG] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by
the iGPU. Conguration options: [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
[1024M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU
power use when idle. Conguration options: [Disabled] [Enabled]
Initiate iGPU [Enabled]
Allows you to enable or disable the Lucid Virtu support for both the integrated and
discrete graphics. The iGPU shared memory size will be xed at 64MB. Conguration
options: [Disabled] [Enabled]
NB PCIe Conguration
Allows you to congure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to congure the PCIE x16_1 speed. Conguration options: [Auto] [Gen1]
[Gen2] [Gen3]
Main
Ai Tweaker
Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Conguration >
UEFI BIOS Utility - Advanced Mode
System Agent Bridge Name SandyBridge
Memory Remap Feature Enabled
> Graphics Conguration
> NB PCIe Conguration