User Manual

38
5.3 Remote Management
HTTPS can be restricted to a subset of IP addresses. The router
administrator can dene a known PC, single IP address or
range of IP addresses that are allowed to access the GUI with
HTTPS. The opened port for SSL traffic can be changed from the
default of 8181 at the same time as dening the allowed remote
management IP address range.
To set up remote access to your router:
1. From the navigation panel, go to Advanced > Remote
Management tab.
2. Move the slider to ON to allow authorized users to access this
GUI over the Internet. By default, remote management over
the Internet is disabled.
3. Set the port number for remote management over HTTPS.
4. Key in the IPv4 Address/IPv6 Address of the PC which is
given remote management permission if you select Single
Computer.
5. Enter a range of IP addresses if you select Range of IPs for
the access type.