User's Manual

7
Downlink LED
O: No power.
Flashing: Scanning for downstream cable signal.
White: Locked on DOCSIS 3.0 downstream signal.
Blue: Locked on DOCSIS 2.0 downstream signal.
Uplink LED
O: No power or not locked on downstream.
Flashing: Ranging
White: Ranging complete DOCSIS 3.0 bonded upstream.
Blue: Ranging complete DOCSIS 2.0 bonded upstream.
Cable WAN LED
O: No power or ranging is not complete.
Flashing: DHCP and registration
On: Online
Ethernet WAN LED
O: No Ethernet WAN connected.
On: Ethernet WAN connected.
2.4GHz LED / 5GHz LED
O: No 2.4GHz or 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
Link LED
O: No LAN devices connected.
Flashing: A Gigabit LAN device is connected to a LAN port.
Blue: Only a 10/100 LAN device is connected to a LAN port.
LED On/O button
Press this button to turn on/o the backlight LED on the panel.
Wi-Fi On/O button
Press this button to turn on /o the Wi-Fi connection.
Reset button
This button resets or restores the system to its factory default settings.
WPS button
This button launches the WPS Wizard.
USB 2.0 port
Insert USB 2.0 devices such as USB hard disks or USB ash drives into this port.
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.