User's Manual

10
1.4 Product label
The product label at the rear of your cable modem router contains
the default Wi-Fi network name (SSID), Wi-Fi password, login
information for the web graphical user interface (web GUI), serial
number, MAC address, and other information.
1.5 Hardware Setup
1.5.1 Setup Requirements
To set up your wireless network, you need a computer that meets
the following system requirements:
• EthernetRJ-45(LAN)port(10Base-T/100Base-
TX/1000BaseTX)
• IEEE802.11a/b/g/n/acwirelesscapability
• WebbrowsersuchasInternetExplorer,Firefox,Safari,or
Google Chrome
NOTES:
• Ifyourcomputerdoesnothavebuilt-inwirelesscapabilities,youmayinstall
an IEEE 802.11a/b/g/n/ac WLAN adapter to your computer to connect to
the network.
• CM-32iscertiedbyComcast,Charter,TimeWarner,andCoxcableservices.
• SomeIEEE802.11ndevicesthatyouwanttoconnecttoyournetwork
may or may not support 5GHz band. Refer to the device's manual for
specications.
• TheEthernetRJ-45cablesthatwillbeusedtoconnectthenetworkdevices
should not exceed 100 meters.