Clique R100 Wireless Music Streamer User Guide FCC ID: PPD-CUS227 XXXXXXXXXX CCAI13LP1670T4 IC: 4104A-CUS227 WARNING! This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling.
Contents Safety information..................................................................... 3 Product features ........................................................................ 3 Specifications.............................................................................. 4 Package contents....................................................................... 4 System requirements................................................................. 4 I/O description..................................
Safety information 1. Read and keep these instructions for future reference. 2. Follow all instructions and take note of all warnings. 3. Do not use this apparatus near water or expose the device to moisture. 4. Clean machine surface with a cloth. Avoid using detergent or cleaning fluid. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6.
Specifications • Wi-Fi Platform: QCA 802.11a/b/g/n AllPlay module • Line Output: Stereo audio output with 3.5mm connector (AUX, S/PDIF) • Supported Audio Formats*: PCM(~192K), MP3(CBR~320K, VBR~260K), WAV(~192K), FLAC(~192K), ALAC(~192K), AIFF(~48K), AAC(~320K), AAC HE(~48K), AAC+(~48K) • Dimension: 90 x 59.5 x 15 mm • Weight: 65 g NOTE: * Ensure that your mobile device supports the audio format to successfully stream audio files.
I/O description 1. AUX/SPDIF 3.5 mm connector 2. Micro USB connector for charging (5V/1A) 3. Standby/Reset button • Standby state: Press the button for 0.5 to 1 second, then release it. To wake up the device, press the button again. • Reset state: Press the button for 4 to10 seconds, then release it.
Connecting speakers/ audio System Active Speaker System Connecting to Wi-Fi home network To connect to Wi-Fi home network: 6 1. Connect your R100 to your audio system and plug to a power source. 2. Wait until the LED turns into slowly flashing green to indicate that it is on setup mode. 3. On your mobile device, connect to your R100 labeled as Allplay_xxxxxx_AJ (xxxxxx:MAC) on your list of available Wi-Fi networks.
4. Launch a web browser and enter http://172.19.42.1 NOTE: On some mobile devices, the web browser launches automatically. 5. Assign a unique name for your R100 to identify it in the AllPlay Jukebox app. 6. Connect your R100 to your network. The LED turns to solid green to indicate a successful connection. 7. Ensure that your mobile device is connected to the same network as your R100.
Playing music on your mobile device To play music on your mobile device: 1. On your mobile device, download and install the free AllPlay Jukebox app from Google Play or App Store . 2. Launch AllPlay Jukebox on your mobile device and wait for your R100 to display. NOTES: 3. 8 • A list of all available Clique R100 or AllPlay-compatible devices is displayed. • Depending on the network speed, it may take about one minute for the list of available devices to display.
4. Tap Music on xxx (xxx stands for your mobile device’s name). All the songs on your mobile device are displayed. 5. Browse the list and add the songs you want to play to your playlist.
6. From your playlist, tap the song that you want to stream, then tap any of the following: • Play Now: Plays the selected song immediately. • Play Next: Plays the next song after the selected song. • Play Last: Plays the song at the end of the playlist. • Cancel: Cancels playback of the selected song.
Streaming music from your home network With Clique R100, you can stream music from devices on your network such as NAS devices, computers, or music servers. To stream music from your home network: 1. Ensure that your computer or other devices are connected to the same Wi-Fi network as Clique R100. 2. Tap Music on the Network, then select the device you want to access your songs from. Streaming music from your computer To stream music from your computer: 1. Launch Windows® Media Player. 2.
Playing music from music services When prompted, install the app for your selected music service. Once the app is installed, you will be able to stream the music of the selected music service from the AllPlay Jukebox app. Supported music services: 12 • AllPlay Radio (powered by TuneIn) • Astro Player (music player) • Aupeo • Dar.
Notes: • The AllPlay app and Clique R100 are only compatible with music services for iOS and Android platforms. • You can use any of these music service apps independently from AllPlay Jukebox. AllPlay Jukebox only offers a view of all the music services compatible with Clique R100. • The grouping and multi-stream features are not available for all music services. • If you have any question related to a music service feature, please contact the corresponding music service directly.
Multi-zones You can stream music from different devices to other Cligue R100 or AllPlaycompatible devices that are connected to the same Wi-Fi network. Multi-room (Party mode) Multi-room/ Party mode needs two or more Clique R100 connected to the same network. It supports up to 10 Clique R100 in 300Mbps network. We recommend that you use two (2) to four (4) Clique R100 for better performance. Notes: • All devices must be connected to the same Wi-Fi network.
3. From the next screen, select the audio devices that you want to group, then tap Done. The device group works as a single device. When you tap the volume control button , a screen appears allowing you to adjust the volume for each device independently. Settings The settings screen provides access to various system settings.
Firmware upgrade To upgrade the firmware: 16 1. From your computer, go the Clique R100 product page to download the latest firmware version. 2. Ensure that your computer is connected to the same network as your Clique R100. 3. Launch AllPlay Jukebox’s Settings page to find the IP address of Clique R100. 4. From your computer, launch a web browser and enter the IP address of Clique R100. 5. Click Upgrade Firmware.
6. Click Choose file and locate the latest firmware file that you downloaded earlier. 7. Click Flash Image and it takes about one (1) minute to upload the firmware file to your Clique R100.
8. Click Proceed to install the firmware. 9. When firmware upgrade is completed, Clique R100 restarts automatically. 10. Launch a web browser and enter the IP address of Clique R100 to check that the latest firmware version has been upgraded successfully.
