User’s Manual

5
Creating a macro profile
Tocreateamacroprole:
1. ClicktheCerberuskeyboardicon onthelowerrighttaskbar.
2. Selecttheprolethatyouwanttocongure.
3. Selectandclickakeyfromtheonscreenkeyboard.Theselectedkeyturnsred.
4. ClickMacro SettingtolaunchtheMacroSettingscreen.
5. ClickStart Recordtostartrecordingallyourkeystrokesandbuttonpresses.
6. ClickStop Recordtoendtherecording,andthenclickAPPLYtosavethemacrosettings.You
mayalsoclickOKtosavethemacrosettingsandexitthescreen.
7. ClickYesontheconrmationmessagetosavethemacrosettingstotheprole.
8. Whendone,clickAPPLYtosavethecurrentprole.
8. Waituntilthemacrosetupiscompleted.
Sync Setting
Tocongurethebacklightsettings:
1. FromtheCerberusinterface,clickSYNC PROGRAM.
2. Clicktheleicon.
3. Clicktheprogram’sexecutablele(.exele).
4. ClickOK,thengobacktothehomescreen.
5. ClickAPPLY or OKtosavethesyncsetting.