User's Manual

3-12
第三章：BIOS 程序設置
第三章
Load 2GB RAW MHz
設置值有：[Yes] [No]
Load 4GB/8GB RAW MHz
設置值有：[Yes] [No]
Maximus Tweak [Auto]
[Auto] 提供系統設置內存兼容性、超頻與系統性能。
[Mode 1] 協助系統內的內存兼容。
[Mode 2] 協助超頻與穩定系統性能。
Primary Timings
DRAM CAS# Latency [Auto]
設置值有：[Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
設置值有：[Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
設置值有：[Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
設置值有：[Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
設置值有：[Auto] [1] – [3]
Latency Boundary A [Auto]
設置值有：[Auto] [1] – [27]
Latency Boundary B [Auto]
設置值有：[Auto] [1] – [14]
Latency Compensator [Auto]
Set this item to [Enabled] to improve performance and overclocking.
設置值有：[Auto] [Enabled] [Disabled]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
設置值有：[Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
設置值有：[Auto] [1] – [511]
DRAM Refresh Interval [Auto]
設置值有：[Auto] [1] – [65535]
DRAM WRITE Recovery Time [Auto]
設置值有：[Auto] [1] – [16]