User's Manual

Single Board Computer

3.6 Installing the wireless card

1. Remove the M.2 stand screw.

2. Align and insert the wireless card into its slot on the motherboard, then

gently push down the wireless card on top of the screw hole and fasten

it using the previously removed stand screw.

3. (optional) Connect the antennas to your wireless card.

NOTE:

• Connectingantennastoyourwirelesscardmaystrengthenthe

wireless signal.

• Asoftclickingsoundindicatesthattheantennahasbeensecurely

attached on the wireless card.

• Theantennasarepurchasedseparately.