User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 LVDS Configuration
- 4.4.2 PCH-FW Configuration
- 4.4.3 Trusted Computing
- 4.4.4 CPU Configuration
- 4.4.5 Graphics Configuration
- 4.4.6 Watchdog Timer
- 4.4.7 AMT Configuration (on selected models)
- 4.4.8 Super IO Configuration
- 4.4.9 Serial Console Redirection
- 4.4.10 SATA configuration
- 4.4.11 VMD setup menu
- 4.4.12 Network Stack Configuration
- 4.4.13 USB Configuration
- 4.4.14 NVMe Configuration
- 4.4.15 Onboard Devices Configuration
- 4.4.16 APM Configuration
- 4.4.17 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 MEBx menu (on selected models)
- 4.10 Updating your BIOS
- Appendix
64
Single Board Computer
VT-d
This item allows you to enable or disable VT-d capability.
Conguration options: [Disabled] [Enabled]
CPU - Power Management Control
Intel(R) SpeedStep(tm)
This item allows more than two frequency to be supported.
Conguration options: [Disabled] [Enabled]
I
ntel(R) Speed Shift Technology
This item allows you to enable or disable Intel(R) Speed Shift
Technology support. When enabled, CPPC v2 interface allows hardware
controlled P-states.
Conguration options: [Disabled] [Enabled]
T
urbo Mode
This item allows you to enable or disable processor Turbo Mode
(requires Intel Speed Step or Intel Speed Shift to be available when
enabled).
Conguration options: [Disabled] [Enabled]
C sta
tes
This item allows you to enable or disable CPU Power Management.
Allows CPU to go to C states when it’s not 100% utilized.
Conguration options: [Disabled] [Enabled]
NO
TE: The following item appears only when C states is set to
[Enabled].
Enhanced C-States
This item allows you to enable or disable C1E. When enabled, CPU will
switch to minimum speed when all cores enter C-State.
Conguration options: [Disabled] [Enabled]