User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 CPU Configuration
- 4.4.4 Graphics Configuration
- 4.4.5 Watchdog Timer
- 4.4.6 AMT Configuration (on selected models)
- 4.4.7 Super IO Configuration
- 4.4.8 Serial Console Redirection
- 4.4.9 SATA configuration
- 4.4.10 VMD setup menu
- 4.4.11 Network Stack Configuration
- 4.4.12 USB Configuration
- 4.4.13 NVMe Configuration
- 4.4.14 Onboard Devices Configuration
- 4.4.15 APM Configuration
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 MEBx menu
- 4.10 Updating your BIOS
- Appendix
90
Single Board Computer
Recovering the BIOS from a USB ash drive
To recover the BIOS from a USB ash drive:
1. Insert the USB ash drive with the original or updated BIOS le to one
of the USB ports on the system.
2. The utility will automatically recover the BIOS. It resets the system
when the BIOS recovery nished.
WARNING! DO NOT shut down or reset the system while recovering
the BIOS! Doing so will cause system boot failure!
NOTE: The recovered BIOS may not be the latest BIOS version for this
motherboard. Visit the ASUS website at www.asus.com to download
the latest BIOS le.
4.10.2 ASUS EzFlash Utility
The ASUS EzFlash Utility feature allows you to update the BIOS using a USB
ash disk without having to use a DOS-based utility.
IMPORTANT! Download the latest BIOS from the ASUS website at
www.asus.com before using this utility.
NOTE: The succeeding BIOS screens are for reference only. The actual
BIOS screen displayed may not be the same as shown.