User Manual

Single Board Computer 67
Terminal Type
Allows you to set the terminal type.
[VT100] ASCII char set.
[VT100Plus] Extends VT100 to support color, function keys, etc.
[VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more
bytes.
[ANSI] Extended ASCII char set.
Bits per second
Selects serial port transmission speed. The speed must be matched on
the other side. Long or noisy lines may require lower speeds.
Conguration options: [9600] [19200] [38400] [57600] [115200]
Data Bits
Congura
tion options: [7] [8]
Parity
A parity bit can be sent with the data bits to detect some transmission
errors. [Mark] and [Space] parity do not allow for error detection.
[None] None.
[Even] parity bit is 0 if the num of 1’s in the data bits is even.
[Odd] parity bit is 0 if num of 1’s in the data bits is odd.
[Mark] parity bit is always 1.
[Space] parity bit is always 0.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates
the beginning.) The standard setting is 1 stop bit. Communication with
slow devices may require more than 1 stop bit.
Conguration options: [1] [2]