User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 PCH-FW Configuration
- 4.4.2 Trusted Computing
- 4.4.3 CPU Configuration
- 4.4.4 Graphics Configuration
- 4.4.5 Watchdog Timer
- 4.4.6 AMT Configuration (on selected models)
- 4.4.7 Super IO Configuration
- 4.4.8 Serial Console Redirection
- 4.4.9 SATA configuration
- 4.4.10 VMD setup menu
- 4.4.11 Network Stack Configuration
- 4.4.12 USB Configuration
- 4.4.13 NVMe Configuration
- 4.4.14 Onboard Devices Configuration
- 4.4.15 APM Configuration
- 4.4.16 EZ-Flash
- 4.5 Hardware Monitor menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 MEBx menu
- 4.10 Updating your BIOS
- Appendix
Single Board Computer
63
4.4.6 AMT Conguration (on selected models)
The items in this menu allow you to congure Intel(R) Active Management
Technology parameters.
AMT BIOS Features
This item allows you to enable or disable AMT BIOS features.
Conguration options: [Disabled] [Enabled]
IMPORTANT! When set to [Disabled], AMT features are no longer
supported, and you will no longer be able to access MEBx setup.
NOTE: Setting this option to [Disabled] will not disable the
manageability features in the rmware.
USB Provisioning of AMT
This item allows you to enable or disable AMT USB Provisioning.
Conguration options: [Disabled] [Enabled]
Uncongure ME
This item allows you to enable or disable uncongure ME by resetting the
MEBx password to its default.
Conguration options: [Disabled] [Enabled]
End Of Post Message
This item allows you to enable or disable End of Post message sent to ME.
Conguration options: [Disabled] [Send in DXE]