User guide

Viglen Genie Executive pBTX 915 User Guide V1.0
53
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system. Configuration options: [xxxxx Drive] [Disabled]
Boot settings Configuration
Figure 69: Boot Settings Configuration Screen
Quick Boot [Enabled]
Allows BIOS to skip certain tests while booting. This will decrease the time needed to
boot the system. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Disabled: Displays normal POST messages. Enabled: Displays OEM Logo instead
of POST messages.Configuration options: [Disabled] [Enabled]
AddOn ROM Display Mode [Force BIOS]
Set display mode for Option ROM. Configuration options: [Force BIOS] [Keep
Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock. Configuration options: [Off]
[On]
Wait For ‘F1’ If Error [Enabled]
Wait for F1 key to be pressed if error occurs. Configuration options: [Disabled]
[Enabled]
Hit ‘DEL’ Message Display [Enabled]
Displays “Press DEL to run Setup” in POST. Configuration options: [Disabled]
[Enabled]
Interrupt 19 Capture [Disabled]
Enabled: Allows option ROMsto trap interrupt 19. This is required by some PCI cards
that provide a ROM based setup utility. Configuration options: [Disabled] [Enabled]