User guide

Viglen Genie Executive pBTX 915 User Guide V1.0
51
Power On By PCIE Devices [Disabled]
Disable/Enable PCIE to generate a wake event. Configuration options: [Disabled]
[Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Keyboard Wakeup Password
This item appears only when the Power On By PS/2 Keyboard is set to Enabled.
Select this item to set or change the keyboard wakeup password. The Keyboard
Wakeup Password item that appears below shows the default Not Installed. After
you have set a password, this item shows Installed.
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
Hardware Monitor
Figure 66: Hardware Monitor Screen
CPU Temperature [xxxºC/xxxºF] & MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select Disabled if you do not wish to display the detected
temperatures.
CPU Fan1 Speed [xxxxRPM], [N/A], or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU fan
speed in rotations per minute (RPM). If the fan is not connected to the motherboard,
the field shows N/A.