User guide

Viglen Genie Executive pBTX 915 User Guide V1.0
29
Figure 37: Reinstalling the system screws
Installing the Foot Stand
You may prefer to position the system vertically to save space. You must reinstall
the foot stands to place the system upright to prevent accidental damage.
To reinstall the foot stands, please follow the below procedure:
1. Fit the foot stands on the chassis cover.
Figure 38: Reattaching the Foot Stands
2. Align the foot stand screw holes with the cover holes.
Figure 39: Aligning the Screw Holes
3. Drive the screws you removed earlier into the screw holes.