User guide

Viglen Genie Executive pBTX 915 User Guide V1.0
21
Figure 21: Reinstalling the Heatsink
3. Close the storage drive assembly.
CAUTION: Please make sure that the CPU fan connectors are plugged
in. Hardware monitoring errors may occur if you fail to plug this
connector.
Expansion Slots
In the future, you may need to install an expansion card. The following sub-sections
describe the slots and the expansion cards that they support.
CAUTION: Make sure to unplug the power cord before adding or
removing expansion cards. Failure to do so may cause you physical
injury and damage motherboard components.
PCI Slot
The PCI slot supports cards such as a LAN card, SCSI card, USB card and other
cards that comply with PCI specifications.
Installing a PCI Card
To install a PCI Card please follow the below procedures:
1. Before installing the expansion card, read the documentation that came with it
and make the necessary hardware settings for the card.
2. Remove the system unit cover.
3. Carefully lift the PCI riser assembly unit it disengages from the chassis.