User guide

Viglen Genie Executive pBTX 915 User Guide V1.0

4. Lift the load plate with your thumb and forefinger to a 100º angle (A), then push

the PnP cap from the load plate window to remove (B).

Figure 18: Lifting the Load Plate

5. Position the CPU over the socket, making sure that the gold triangle is on the

bottom-left corner of the socket. The socket alignment key should fit into the CPU

notch.

Figure19: Positioning the CPU

6. Close the load plate (A), then push the load lever (B) until it snaps into the

retention tab.

Figure 20: Closing the Load Plate