User guide

Viglen Genie Executive pBTX 915 User Guide V1.0

Installing the CPU

To install a CPU:

1. Locate the CPU socket on the motherboard.

Figure 15: CPU Socket 775 Location

Note: Before installing the CPU, make sure that the cam box is facing towards you

and the load lever is on your left.

2. Press the load lever with your thumb (a), then move it to the left (b) until it is

released from the retention tab.

Figure 16: Pressing the Load Lever

CAUTION: To prevent damage to the socket pins, do not remove the

PnP cap unless you are installing a CPU.

3. Lift the load lever in the direction of the arrow to a 135° angle.

Figure 17: Lift the Load Lever