User guide

Viglen Genie Executive pBTX 915 User Guide V1.0
15
Figure 11: Storage Assembly in maximum Orientation
CAUTION: When fully open, the storage drive assembly remains slightly
tilted. Do not push down further to prevent damage to the system.
Installing the System Memory
The system motherboard comes with two Double Data Rate (DDR) Dual Inline
Memory Module(s) (DIMM) sockets that support up to 2GB system memory using
unbuffered ECC and non-ECC PC32--/2700 DIMMS.
Figure 12: Installing System memory
CAUTION: Make sure only identical Viglen certified memory modules
are installed in the Viglen Genie Executive pBTX unit. Please contact
Viglen Technical Support for the latest approved memory list.
Memory Configurations
The Viglen Genie Executive pBTX supports up to 2GB of system memory using
256Mb, 512MB and 1GB DDR DIMMs.
• Installing DDR DIMMs other than the recommended configurations may cause
memory sizing error or system boot failure.
• Install only identical (the same type and size) DDR DIMM in DIMM_A1 and
DIMM_B1.