User guide

Viglen Genie Executive pBTX 915 User Guide V1.0

Figure 9: Remove the Front Panel

7. Lift the front bezel hooks outward until they disengage from the chassis.

8. Carefully remove the front cover, and then set it aside.

CAUTION: Remove the SATA cable from the hard disk drive before you

open the front bezel, otherwise the hard disk drives SATA connector

may be easily damaged.

Opening the Storage Drive Assembly

Opening the storage drive assembly gives you more space when installing the CPU

and the CPU heatsink.

To open the storage drive assembly:

1. Remove the cover and front bezel. Refer to the previous section for details.

2. Carefully lift and pull down the storage drive assembly

Figure 10: Lifting the Storage Assembly

The storage drive assembly does not disengage from the chassis