Specifications

Router Internet Setup

N150 Wireless ADSL2+ Modem Router DGN1000

address of that computer. This feature allows your wireless modem router to use your

computer’s MAC address (this is also called cloning).

Use Default Address. Use th

e defa

ult MAC address.

Use Computer MAC Address. The wire

less modem router will capture and use the MAC

address of the computer that you are now using. You need to be using the one computer

that is allowed by the ISP.

Use This MAC Address. Enter the

MAC add

ress that you want to use.

DSL Settings

The DSL settings of your wireless modem router work fine for most ISPs. However, some

ISPs use a specific multiplexing method and virtual circuit number for the virtual path

identifier (VPI) and virtual channel identifier (VCI).

Note: It is required that you use the Setup Wizard to select the correct

country for the default DSL settings to work.

 If your ISP gave you a multiplexing method or VPI/VCI number, enter the setting:

1. Select Setup > ADSL Settings

to display the following screen:

2. In the Multiplexing Method drop-down list, select LLC-based or VC-based.

3. For the VPI, type a number between 0 and 255. The default is 8 for the U.S. version, 0 for

e world wide version, and 1 for the German version.

4. For the VCI, type a number between 32 and 65535. The default is 35 for the U.S. version,

38 fo

r the worldwide version, and 32 for the German version.

5. Click Apply.