Service manual

7 - 2 Genie GS-1530 & Genie GS-1930 Part No. 39528

Service Manual - First Edition

Section 7 - Repair Procedures

Platform Controls

1-1

Platform Controller

The platform controller is controlled by an ECM

(Electronic Control Module) located in the battery

pack module tray. It is a fully self-contained unit

which is capable of recognizing machine

malfunctions with on-board diagnostics and

displays a fault code on a digital display on the

ECM. This aids in troubleshooting the machine by

pinpointing the fault or malfunction. See the

Troubleshooting section of this manual for a list of

fault codes and additional information. The ECM is

not user-serviceable. For further information or

assistance, consult the Genie Industries Service

Department.

a Main circuit board

b Lift/drive selector toggle switch

c Horn button

d Emergency stop button

e LED circuit board

f Joystick controller

a Main circuit board

b Emergency stop button

c Joystick controller

d Alarm

Platform Controller

(after serial number 17407)

Platform Controller

(before serial number 17408)