Service manual

5 - 32 Genie GS-1530 & Genie GS-1930 Part No. 39528
Service Manual - First EditionSection 5 - Troubleshooting Flow Charts
Chart 14
Machine
Drives At
Full Speed
With Platform
Raised
Be sure the circuit
breaker and fuse
are not tripped or
blown.
Be sure the
batteries are
properly connected.
Be sure the
batteries are fully
charged.
With the key switch in
platform position and the
Emergency Stop buttons
pulled out to the
ON
position at both the
ground and platform
controls, and the
platform in the stowed
position, drive the
machine in either
direction. Is the error
indicator light on at the
platform controls?
light is
not on
light
is on
See Chart 13 OR
remove the obstruction
from the pothole guard
OR consult the Genie
Industries Service
Department.
Consult the Genie
Industries Service
Department.