Service manual

Genie GS-1530 & GS-1930 Part No. 39528
Service Manual - First Edition
Table of Contents
Introduction
Important Information...................................................................................................... ii
Section One Safety Rules
General Safety Rules..................................................................................................... iii
Theory of Operation ....................................................................................................... v
Section Two Rev Specifications
D Machine Specifications ................................................................................ 2 - 1
D Performance Specifications ......................................................................... 2 - 2
D Hydraulic Specifications ............................................................................... 2 - 2
D Hydraulic Hose and Fitting Torque Specifications ........................................ 2 - 3
Section Three Scheduled Maintenance Inspections
Introduction ............................................................................................................... 3 - 1
Table A ..................................................................................................................... 3 - 2
Table B ..................................................................................................................... 3 - 2
Table C ..................................................................................................................... 3 - 3
Table D ..................................................................................................................... 3 - 3
Maintenance Inspection Report ................................................................................ 3 - 4
Section Four Scheduled Maintenance Procedures
Introduction ............................................................................................................... 4 - 1
A-1 Inspect the Operator’s and Safety Manuals .................................................... 4 - 2
A-2 Inspect the Decals and Placards ..................................................................... 4 - 2
A-3 Inspect for Damage and Loose or Missing Parts ............................................. 4 - 3
A-4 Check the Hydraulic Oil Level ......................................................................... 4 - 3
A-5 Check for Hydraulic Leaks .............................................................................. 4 - 4
A-6 Test the Platform and Ground Controls ........................................................... 4 - 4
A-7 Test the Manual Platform Lowering Operation ................................................ 4 - 5
A-8 Test the Tilt Sensor ......................................................................................... 4 - 6
A-9 Test the Pothole Guards ................................................................................. 4 - 6
A-10 Test the Lift/Drive Select Switch (before serial number 17408) ...................... 4 - 7
A-11 Perform 30 Day Service .................................................................................. 4 - 7
vi