Service manual

3 - 4 Genie GS-1530 & Genie GS-1930 Part No. 39528
Section 3 - Scheduled Maintenance Inspections Service Manual - First Edition
Tools are
required
New parts
required
Dealer
service
suggested
Checklist A Y N R
Refer to Table A
A-1 Operator's and
Safety manuals
A-2 Decals and placards
A-3 Damage, loose or
missing parts
A-4 Hydraulic oil level
A-5 Hydraulic leaks
A-6 Platform and
ground controls
A-7 Manual Platform Lowering
A-8 Tilt sensor
A-9 Pothole Guards
A-10 Lift/drive Select Switch
(before serial number 17408)
A-11 30 Day Service
Checklist B Y N R
Refer to Table B
B-1 Batteries
B-2 Electrical wiring
B-3 Tires and wheels
B-4 Key Switch
B-5 Emergency Stop
B-6 Horn
B-7 Drive Brakes
B-8 Drive speed - stowed
B-9 Drive speed - raised
B-10 Hydraulic oil analysis
B-11 Electrical contactor
(before serial number 6901)
Checklist C Y N R
Refer to Table C
C-6 Hydraulic filter
Checklist D Y N R
Refer to Table D
D-1 Hydraulic oil
Instructions
· Make copies of this page to use for
each inspection.
· Select the appropriate checklist(s) for
the type of inspection to be performed.
Daily Inspection: A
Quarterly Inspection: A+B
Annual Inspection: A+B+C
2 Year Inspection: A+B+C+D
· Place a check in the appropriate box
after each inspection procedure is
completed.
· Use the maintenance tables in this
section and the step-by-step
procedures in section 4 to learn how to
perform these inspections.
· If any inspection receives an “N,” tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the “R” box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Comments
Maintenance Inspection Report
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company