User's Manual
Table Of Contents
- Notices
- Safety information
- Conventions used in this guide
- Where to find more information
- Package contents
- Chapter 1: Getting started
- Chapter 2: Using Windows® 7
- Chapter 3: Using Windows® 8
- Chapter 4: Connecting devices to your computer
- Chapter 5: Using your computer
- Chapter 6: Connecting to the Internet
- Chapter 7: Using the utilities
- Chapter 8: Troubleshooting
Conguring the USB ports using the BIOS
You can enable or disable the front and rear USB 2.0 and USB 3.0 ports from the BIOS
Setup.
To disable or enable the front and rear USB 2.0 and 3.0 ports:
1. Press <Delete> to enter the BIOS Setup at startup.
2. From the BIOS Setup screen, click
Advanced > USB Conguration.
3. Select the USB port that you want to enable or disable.
4. Press <Enter> to enable or disable the selected USB port.
5. Click
Exit and select Save Changes & Reset to save the changes made.
Refer to Chapter 1 for the locations of the USB ports.
ENGLISH
ENGLISH
ASUS BM6635(MD560), BM6835, and BP6335(SD560) 57
ENGLISH
ENGLISH