User Manual

3-34
Chapter 3: BIOS setup
Chapter 3
3.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Conguration options: [Disabled] [Enabled]
Voltage Monitor
CPU Voltage; 3.3V Voltage; 5V Voltage; 12V Voltage ; VTT CPU Voltage;
CPU VCCSA Voltage; CPU PLL Voltage; DRAM AB Voltage; DRAM CD Voltage;
PCH 1.1 Voltage; PCH 1.5 Voltage; 2nd VTTCPU Voltage
The onboard hardware monitor automatically detects the voltage output through the
onboard voltage regulators. Press <Enter> and select [Ignore] if you do not wish to
display the detected temperatures.
Temperature Monitor
CPU Temperature; MB Temperature; PCH Temperature; PCH Overheat
Protection*; OPT1/OPT2/OPT3 Temperature; OPT TEMP1/TEMP2/TEMP3
[xxx
o
C/xxx
o
F]
The onboard hardware monitor automatically detects and displays the CPU, and
motherboard. Press <Enter> and select [Ignore] if you do not wish to display the
detected temperatures.
The PCH Overheat Protection on PCH/OPT1/OPT2/OPT3 shuts down the system when
temperature reaches user-specied values.
Fan Speed Monitor
CPU FAN Speed; CPU OPT Speed; Chassis FAN 1/FAN 2/FAN 3 Speed;
Opt FAN 1/FAN 2/FAN 3 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU fan,
chassis fan, and optional fan speed in rotations per minute (RPM). If any of the fans
is not connected to the motherboard, the eld shows [N/A]. These items are not
user-congurable. Press <Enter> and select [Ignore] if you do not wish to display the
detected temperatures.