User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Adjusting the webcam
- 2.6 Connecting the cables
- 2.7 Turning on the monitor
- 2.8 Setting up the monitor webcam as default setting
- 2.9 Setting up the monitor speaker as default setting
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
1.3.2 Back view
11
1. Power switch. Press the switch to turn on/off power.
2. AC-IN port. This port connects the power cord.
3. HDMI port. This port is for connection with an HDMI compatible device.
4. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
5. USB 3.2 Gen1 Type-C. This port is for connection with a USB upstream
cable. The connection supports USB power and data delivery.
This monitor is Super-Speed USB 3.2 Gen1 compatible (5Gbps). The port offers
Max. 80W power delivery with output voltage 5V/3A, 9V/3A, 12V/3A, 15V/3A
and 20V/4A. Connecting the USB Type-C cable can input the DisplayPort
source, output power and enable the USB Type-A ports (downstream) on the
monitor. Connecting the USB Type-C to Type-A cable only enables the USB
Type-A ports (downstream) on the monitor.
6. Daisy-Chain DisplayPort output. This port allows you to connect multiple
DisplayPort compatible monitors.
7. Earphone jack. This port is only available when an HDMI/DisplayPort/USB
Type-C cable is connected.
8. RJ45 port. This port is for connection with the Internet.
9. USB 3.2 Gen1 Type A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.
10. Kensington lock slot.
11. USB 3.2 Gen1 Type A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.