User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Attaching/Removing the MiniPC Kit
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on the monitor
- 2.7 Touch operation
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
10. USB 3.2 Gen1 Type A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.
Port with icon is BC1.2 compliant.
1.3.3 Other Function(s)
1. Daisy chaining (for selected models)
The monitor supports daisy chain on DisplayPort. Daisy Chaining allows up to 4
monitors to be connected in series with the video signal being passed from the
source to a monitor (when the input source is 1920 x 1080@60Hz and no USB-C
device is connected). In order to enable daisy chaining, please make sure the
source transported.
This function is only available when DisplayPort Stream in the OSD menu is
DisplayPort 1.4. Also, your computer graphics card must be certied to at least
DP1.4 with MST option. If you set DisplayPort Stream to DisplayPort 1.1, all the
connected monitor will display the same content at the same time (clone).
1920x1080@60Hz
1920x1080@75Hz
1920x1080@60Hz
or