Setup Guide

Windows

7 and USB 3.0 driver installation

Method 2: Using a modied Windows

7 ISO

Load USB 3.0 drivers and install Windows

7 using a modied Windows

7 installation DVD.

Requirement:

• 1 x ASUS support DVD

• 1 x Windows

7 installation source

• 1 x Working system (PC or notebook)

• 1 x SATA ODD

1. On your working system, create an ISO image le of the Windows

7 installation source using

a third-party ISO software.

2. Copy both “Auto_Unattend.xml” and “Auto_Unattend” folder from the root directory of the

ASUS supporting DVD to your system.

3. Edit the ISO le and add both “Auto_Unattend.xml” and “Auto_Unattend” folder into the ISO

le.

4. Burn this ISO le onto an empty DVD to create a modied Windows

7 installation DVD.

5. Insert the modied Windows

7 installation DVD into an ODD on your system.

6. Power on your system and press F8 during POST (Power-On Self Test) to enter the boot

screen.

7. Select the ODD as the boot device.

6. The USB 3.0 driver will be loaded automatically during installation startup.

The “Setup is starting...” screen will show up if the USB 3.0 driver is loaded correctly.

7. Follow the onscreen instructions to complete the Windows

7 installation.