User's Manual

ASUS B150M PRO GAMING
2-29
2.6.6 USB Configuration
The items in this menu allow you to change the USB‑related features.
The USB Devices item shows the auto‑detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables Legacy USB support.
[Disabled] Keeps USB devices available only for EFI applications.
[Auto] Disables legacy support if no USB devices are connected.
XHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without XHCI hand‑off support.
[Disabled] Disables the XHCI hand‑off support.
USB Single Port Control
The sub‑items in this menu allow you to set the USB Port Disable Override features.
USB3_1-6, USB7-10 [Enabled]
Allows you to enable or disable the USB port individually.
Conguration options: [Disabled] [Enabled]
Refer to section 1.2.3 Motherboard layout for the location of the USB ports.
2.6.7 Onboard Devices Configuration
HD Audio Controller [Enabled]
[Disabled] Disables the HD Audio Device.
[Enabled] Enables the HD Audio Device.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high‑denition audio depending on the audio standard that the front panel audio
module supports.
[HD Audio] Sets the front panel audio connector (AAFP) mode to high
denition audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy
AC’97.