User Guide

Expanding Capacity 4-31
Version 1.0 Copyright © 2001-2003 by LSI Logic Corporation. All rights reserved.
Caution:It is highly recommended that you backup your data and
current configuration before making modifications.
To perform an Array Expansion, follow these steps:
1. Select Administration->RAID Assist on the menu bar or the RAID
Assist icon (see Figure 4.7).
2. Click the Manual Configuration button.
3. Click Expand Array. The Manual Configuration Disk Array tab (see
Figure 4.31) will open. This is where you can add available disk drive
capacity.
4. Select the physical drive(s) that you want to add to the array and
drag and drop them to the desired array (see Figure 4.31).
Figure 4.31 Adding Physical Drives to an Array
5. Click the Logical Drives tab.