User Guide

Running RAID Assist 4-13

Figure 4.11 WARNING Before Applying the Configuration

4. Type YES and click OK if you are sure you want to apply the new

configuration and overwrite the old. If you’re not sure, click Cancel.

4.5.3 Assisted Configuration

Assisted Configuration provides three options:

• New Configuration. Sets up a new configuration on the controller,

deleting the previous configuration and data (if any).

• Add Logical Drive. Sets up additional arrays (logical drives) leaving

the existing array(s) intact. At least one array must be configured on

this controller, and unconfigured drive space must remain.

• Expand Array. Restripes data in your array across additional,

unconfigured drives to expand the capacity of the array.

For example, open New Configuration as shown in Figure 4.12: