User Guide

3-30 Startup and Navigation
Version 1.0 Copyright © 2001-2003 by LSI Logic Corporation. All rights reserved.
3.7.2.7 Remove Email
1. Select the Email alarm type in the upper window of Alarm Setup.
2. Select the Email entry to remove in the lower window of Alarm Setup.
3. Click Remove.
4. At the confirmation message, click Yes to remove the Email entry, or
click No to keep the entry.
3.7.2.8 Add an Email Using Linux
When using Linux, the behavior of the E-mail Alert function is defined in
gam2cl.ini file as follows, which is located under “~User/.gam/”.
[COMM_SECTION]
...
EMAILUSERSCRIPT=/usr/bin/mail -s “%S” %R < %M
...
where,
%S is replaced with subject string
%R is replaced with recipients
%M is replaced with message file name
3.7.2.9 Add an Application to Launch
1. Select the Launch Application alarm type in the upper window of the
Alarm Setup dialog box (Figure 3.27).