User Guide

3-18 Startup and Navigation

2. In the Adding Item dialog box, type the name of the server group that

you are adding.

3. Click OK. The Define Server Groups dialog box will reappear with the

newly-defined server group added.

Note:

The Discovered group contains a list of all server hosts that

are sending events to the client.

3.5.2 Adding a Server to the Server Groups List

With the Define Server Groups dialog box open (Figure 3.15), do the

following:

1. Click the Add button under the Servers section of the dialog box.

2. In the Adding Item dialog box, type the IP address of the server that

you are adding. If you’re running GAM TT Client under Windows

2000/2003/XP 32-bit/95/98/Me or Linux, you may instead type the

name of the server.

3. Click OK. The Define Server Groups dialog box will reappear with the

newly-defined server added.

4. To add more servers to the group, repeat steps 1 through 3.

5. Click OK in the Define Server Groups dialog box when you are

finished.

After adding servers, Global Array Manager Transition Tool returns to the

Global Status window.

Note:

Select “All Servers” to see all servers in the Global Status

view.