User Guide

Status Icons 3-11
Version 1.0 Copyright © 2001-2003 by LSI Logic Corporation. All rights reserved.
• Consistency Check Status: Displays the progress (percent
complete) of an ongoing logical drive consistency check.
• Expand Capacity Status: Displays the progress (percent complete)
of an ongoing data restriping process across the target RAID group.
• Patrol Read Status: Enables GAM TT Client to poll every 1 minute
to get new status data from the controller.
• Error Table: Displays a table of bad block and “request sense” data
generated as a result of finding areas of damage or data
unavailability on a storage device. Data for all storage devices on the
selected controller are presented in the same tables.
• Cluster Map (Mylex Controllers Only): Displays a graphical back
end cable connection for the controller selected from the cluster
controller list.
3.3.1.3 Administration Menu
The Administration menu (Figure 3.9) contains the following options:
• Sign On: Enables use of GAM’s configuration and administration
functions to “Administrators” (“gamroot” + password). Enables only
monitoring functions to “Users.”
• Define Server Groups: Sets up server groups and individual server
names or IP addresses within each group.
• Select Current Server Group (Ctrl+G): Displays the current
contents of the server selection box located in the Global Array
Manager Transition Tool window. Functions in the same way as
directly selecting the server selection box.
• Select Current Controller (Ctrl+C): Displays the current contents of
the controller selection box located in the Global Array Manager
Transition Tool window. Functions in the same way as directly
selecting the controller selection box.
• RAID Assist: Mylex’s built-in RAID Controller configuration utility.
Facilitates configuration tasks using either one-step “automatic”
configuration, a configuration “wizard” assistant, or a manual
(advanced level) configuration option allowing more control over
configuration parameters.