User Guide

Clearing a Configuration 6-11
Version 1.0 Copyright © 2001-2003 by LSI Logic Corporation. All rights reserved.
Figure 6.12 Mylex Only - Clear Configuration Dialog Box
1. Select the disk array(s) that you want to delete.
2. Click OK to clear the configuration. A caution message box
will open (see Figure 6.13).
Figure 6.13 Clear Configuration Caution Message
– For MegaRAID controllers: A caution message box will open
(see Figure 6.13).
2. Click the Yes button to continue.
A warning message box will open (see Figure 6.14).
Figure 6.14 Clear Configuration Warning Message
3. To confirm your decision to clear the selected configuration, type
YES then click OK, or click Cancel to stop.