User Guide

Enclosure Monitoring and Management 5-17

• The number of drive slots in the enclosure cabinet.

Highlight an enclosure and the Locate button will become available (for

Mylex Controllers Only). Click the Locate button to “blink” the LEDs of all

of the physical drives in the enclosure to reveal its location. A locate

enclosure dialog box will open, click OK or press the Enter key to end

the locate operation.

Click the Close button or press the Enter key to close the dialog box.

5.5.2 Details Page

Select the Details Tab to display Enclosure Information Details

(Figure 5.15).

Figure 5.15 SES Enclosure Information – Details Page

Enclosure Information Details page displays the following about the

currently-available Fibre enclosures:

The status of each enclosure, identified by an icon and an enclosure

number, as well as one of the following expressed in text:

• OK – All components are optimal.

• Critical – Some component has failed; one more failure may result in

data loss.

• Failed – A failure has occurred that may result in data loss.