User Guide

A-32 SNMP Installation, Operation, and Definition
Copyright © 2001, 2003 by LSI Logic Corporation. All rights reserved.
(a2ControllerModel) (Integer) 105 DAC960MFL
106 DAC960MFF
107 DAC960FFX
108 DAC960FFX2
109 DACFFX2
255 Unknown
a2SystemBusNumber
1.3.6.1.4.1.1608.1.1.1.2.1.21
Integer The system bus number for the controller. This
value is supplied by the Operating System and
may not be defined for all operating systems.
a2SlotNumber
1.3.6.1.4.1.1608.1.1.1.2.1.22
Integer The slot number where the controller resides,
defined for EISA and MCA controller only
a2InterruptVectorNumber
1.3.6.1.4.1.1608.1.1.1.2.1.23
Integer The interrupt vector number being used by the
controller. This value is a mapped IRQ supplied
by the Operating System and may not be same
as the actual Interrupt Vector
a2InterruptMode
1.3.6.1.4.1.1608.1.1.1.2.1.24
Integer Numerical identification of the interrupt mode
(edge/level):
Value Meaning
0EDGE
1 LEVEL
255 Unknown
a2NumberOfPhysicalDevices
1.3.6.1.4.1.1608.1.1.1.2.1.25
Integer The number of SCSI devices detected
a2NumberOfPhysicalDevicesOffline
1.3.6.1.4.1.1608.1.1.1.2.1.26
Integer The number of SCSI devices with an opera-
tional state of DEAD
a2NumberOfLogicalDevices
1.3.6.1.4.1.1608.1.1.1.2.1.27
Integer The number of logical devices currently
configured
a2NumberOfLogicalDevicesCritical
1.3.6.1.4.1.1608.1.1.1.2.1.28
Integer The number of logical devices in a “critical”
state
a2NumberOfLogicalDevicesOffline
1.3.6.1.4.1.1608.1.1.1.2.1.29
Integer The number of OFFLINE logical devices
Table A.4 Controller Information Group (Cont.)
Table Object Data Type Description
(Sheet 5 of 8)