User Guide

2 Installation

2.1 Overview

In this chapter we will cover how to install the IEEE802.11b WLAN PCMCIA

Adapter/Card.

To establish your wireless network connection, the following steps should be

executed.

1. Install the software using the installation CD

2. Install the wireless LAN card.

3. Install the required network protocols to communicate with your network. Most

likely, you will need the TCP/IP protocol.

The product is designed to operate in Windows 98, Windows ME, and Windows 2000.

And the installation procedure is about the same. Please follow up the installation

wizard that provided by your system to install the software. The example here is based

on Window 98SE.

2.2 Install the IEEE802.11b WLAN Utility/Driver

Please install the IEEE802.11b WLAN Utility/Driver first

before inserting the IEEE802.11b WLAN PCMCIA Card.

1. Insert the IEEE802.11b WLAN installation CD into your CD-ROM drive. The setup

program will then automatically start.

2. The setup program will start and the setup screen will appear on your monitor.

Select “Next” to go to the next screen.