User Manual

ASUS AT5NM10T-I 1-2
1.2.2 Layout contents
1.2 Motherboard overview
1.2.1 Motherboard layout
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
Ensure that you install the motherboard into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
Place this side
towards the rear of
the chassis.
AT5NM10T-I
PCIEX4_1
USB78
AAFP
ATX12V
EATXPWR
CHA_FAN CPU_FAN
LVDS
Lithium Cell
CMOS Power
VIA
VT1705
RTL
8111E
JMB
362
Super
I/O
8Mb
BIOS
SB_PWR
CLRTC
SPDIF_OUT
USBPW78
PS2_USBPW1-6
17.0cm(6.7in)
17.0cm(6.7in)
Intel
®
NM10
DDR3 SO-DIMM_A1 (64bit, 204-pin module)
Intel
®
Atom™
processor D525
DDR3 SO-DIMM_A2 (64bit, 204-pin module)
SATA3G_E2 SATA3G_2
SATA3G_E1 SATA3G_1
KB_USB56
AUDIO
LAN1_USB12
USB34
COM2
F_PANEL
CHASSIS
SPEAKER
VGA
COM1
LPT
8
21 3 4 5 6
9
2
14 10
7
1112131718 16 15
Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page
1. LPT connector (26-1 pin LPT ) 1-16 10. System panel connector (10-1 pin F_PANEL) 1-12
2.
ATX power connectors (24-pin EATXPWR,
4-pin ATX12V)
1-10 11. Clear RTC RAM (3-pin CLRTC) 1-7
3. Serial port connector (10-1 pin COM2) 1-15 12. Onboard LED (SB_PWR) 1-1
4.
CPU and chassis fan connectors (4-pin
CPU_FAN, 4-pin CHA_FAN)
1-13 13.
Serial ATA connectors (7-pin SATA3G_1,
SATA3G_2, SATA3G_E1, SATA3G_E2)
1-11
5. LVDS connector (30-pin LVDS) 1-14 14. USB connector (10-1 pin USB78) 1-11
6. Intel
®
Atom™ D525 processor 1-3 15. USB device wake-up (3-pin USBPW7-8) 1-15
7. DDR3 SO-DIMM sockets 1-3 16. Digital audio connector (4-1 pin SPDIF_OUT) 1-8
8. Chassis intrusion connector (4-1 pin CHASSIS) 1-12 17.
Keyboard/mouse power setting (3-pin
PS2_USBPW1-6)
1-13
9. Speaker connector (4-pin SPEAKER) 1-12 18. Front panel audio connector (10-1 pin AAFP)