User's Manual

E520

Quickly enter the BIOS

To quickly enter the BIOS:

• Pressthepowerbuttonforatleastfour(4)secondstoshutdown

your PC, then insert a straightened paper clip into the BIOS key

slot, and press the power button again to turn your PC back on

and enter BIOS.

NOTE: POST (Power-On Self Test) is a series of software controlled

diagnostic tests that run when you turn on your PC.

Load default BIOS settings

To load the default values for each of the parameters in your BIOS:

• EntertheBIOSbyfollowingthestepsmentionedinthe Quickly

enter the BIOS section.

• NavigatetotheExit menu.

• SelecttheLoad Optimized Defaults option, or you may press

<F5>.

• SelectYes to load the default BIOS values.